Seismic Reflection Data Processing in the RadExPro Software

All standard stages of basic CDP processing are covered, from geometry definition to stacking, that is the so-called minimal processing sequence. Creating of a new RadExPro processing project, data load and assigning geometry, data display and interactive analysis, sorting, preprocessing (amplitude recovery, spectral widening, bandpass filtering, trace equalization, muting), interactive velocity analysis, NMO-correction, stacking and display of the resulting CMP stack are discussed. 

Text (Revised 21.11.2007)
EN_tutorCDP.pdf (size 4.75Mb)

Accessorials:
Input data: inpdata.zip (size 64Mb)
Resulting RadExPro project: MyProject.zip (size 170Mb)

VSP Data Processing in the RadExPro Software

The Tutorial covers all standard stages of basic VSP processing, from data input to building a velocity model, tying VSP data to seismic survey data and printing out the results. Creation of a new RadExPro Plus processing project, data load, assigning geometry, picking of first arrivals of the P- and S-waves, component orientation, estimation of the deconvolution parameters, reflected wave field separation, building of velocity model, corridor stack trace, VSP migration and VSP-CMP transformation, tying of VSP data to seismics are discussed. 

Text (Revised 19.10.2009):
EN_tutorVSP_091019.pdf (size 4.8Mb)

Accessorials:
Input data: InData.zip (size 16Mb)
Resulting RadExPro project: MyVSPProject.zip (size 77Mb)

Refraction Seismic Data Processing in the RadExPro Software

The Tutorial describes processing of seismic refraction data using the RadExPro Easy Refraction module. All steps are discussed: data loading, geometry assignment, first break picking, assigning travel-time segments to different layers and, finally, inversion of the travel times and building a layered velocity model of the subsurface.

Text (Revised 05.04.2011) (size 1.77Mb)

Accessorials:
Input data (size 377Kb)
Resulting RadExPro project (size 2Mb)

Multichannel Analysis of Surface Wave (MASW) in
the RadExPro Software

The tutorial is addressed to those who want to learn how to process surface wave data in the RadExPro using the MASW method. All processing stages, including the data loading, geometry assignment, extraction of dispersion curves, inversion, and building of the resulting Vs cross-section are described.

Text (Revised 08.07.2011) (1.9 Mb)

Accessorials:

Input data (268 Kb)
Resulting RadExPro project  (1.27 Mb)